Spark Engineering & Automation


EnglishArabicFrenchGermanHindi


Stepper Motor Driver (SEA5045)



We are dependable provider of Stepper Motor Driver (CAW). The Stepper Motor Driver, offered by us, is made from high-grade components and materials to ensure its excellent performance and longer working life. The Stepper Motor Driver can be availed from us at the most competitive prices.

Characteristics :

  • DC power input type : 24V ~ 50VDC
  • Output current : 1.3A-4.5A
  • Mircostepping : 1(1.8o), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250
  • Protect form : Overheated protect, lock automatic half current ,error connect protect
  • Dimensions : 118mm Ã� 76mm Ã� 33mm
  • Weight : < 300g
  • Working environment : Temperature -15 ~ 40o) Humidity < 90%


I/O Ports :

  • VCC+ : DC power positive pole
  • GND : DC power cathode
  • A+, A- : Stepping motor one winding
  • B+, B- : Stepping motor other winding
  • PUL+, PUL- : Stepping pulse input+5V (Rising edge effective, rising edge duration >10μS)
  • DIR +, DIR- : Stepping motor direction input, voltage level touched off,high towards, low reverse
  • ENA+, ENA- : motor free


Note :

  • When ambient temperature is high or working current over 2.7A, fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time
  • Half current automatically : if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric
  • The fault phase is protected : When the double-phase electrical machinery is connected with driver , users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small. Please check whether the wiring of electrical machinery is a mistake.

Specifications

Type Microstepping Motor Driver
Certification CE Certified
Application Motor Use
Color Available in Many Colors
Voltage 220V
Power 100Watt, 200Watt
Warranty 1 Year
Driven Eelectric


Microstepping choice

SW 5 0 0 0 0 0 0 0 0 1 1 1 1 1 1
SW 6 0 1 0 1 0 1 0 1 0 1 0 1 0 1
SW 7 0 0 1 1 0 0 1 1 0 0 1 1 0 0
SW 8 0 0 0 0 1 1 1 1 0 0 0 0 1 1
Micro 1/2 1/4 1/8 1/16 1/32 1/64 1/128 1/256 1/5 1/10 1/25 1/50 1/125 1/250

Current choice

SW 1 0 1 0 1 0 1 0 1
SW 2 0 0 1 1 0 0 1 1
SW 3 0 0 0 0 1 1 1 1
Current (A) 1.3 1.8 2.3 2.7 3.2 3.7 4.2 4.5
Full current or half current choice : SW4 : 0 = Full current : 1 = half current